|
|
 Maksim Belov,  Ekaterina Kuzmina,  Nadezhda Filina,  Ammar Muthanna
The Bonch-Bruevich Saint Petersburg State University of Telecommunications, St. Petersburg, 193232, Russian Federation
DOI 10.31854/2307-1303-2026-14-1-35-56
EDN YKGWDF
|
|
Full text
XML JATS
Abstract
Purpose. The development of the Industrial Internet of Things (IIoT) within the framework of the “Industry 4.0” paradigm is accompanied by an increase in the number of connected devices, growing demands for data transmission rate, and stringent latency constraints. In real-time control systems, even millisecond-level delays may lead to desynchronization of robotic mechanisms, production line interruptions, and economic losses. Widely used transport protocols, TCP and UDP, exhibit significant limitations: the former provides reliability at the cost of increased latency and overhead, while the latter ensures minimal delay without delivery control, which is critical for industrial processes. The purpose of this paper is to perform a comparative analysis of TCP, UDP, and QUIC transport protocols under conditions close to industrial scenarios and to evaluate their applicability for robotic control and reliable IIoT communications. Methods. Network analysis was conducted using the Wireshark packet analyzer and a custom-developed Python-based software complex incorporating the pyshark and matplotlib libraries. The study included PCAP file analysis, construction of time series, calculation of key metrics (command transmission rate, packet loss ratio, and command series size b), and their visualization. The elements of novelty consist in the comprehensive comparison of three transport protocols in the context of robotic manipulator control, where millisecond-level delays are critical; the application of QUIC, a relatively new protocol not previously examined in applied IIoT scenarios; and the development of a software tool enabling automated traffic analysis and classification in industrial environments. Results. Experimental results show that TCP provides zero packet loss but an unacceptably low command rate (0.58 commands/s). UDP achieves an order-of-magnitude higher rate (5.8 commands/s) but suffers from 3.88 % packet loss, rendering it unsuitable for high-precision operations. QUIC demonstrates the best performance: 18.16 commands/s with less than 1 % packet loss and a threefold increase in the average command series size b. Theoretical relevance. The obtained results confirm the prospects of using the QUIC protocol in IIoT industrial networks. Its adoption ensures minimal latency and high transmission reliability while significantly reducing network load through stream multiplexing. Practical implementation may involve integration of QUIC into robotic control systems, sensor networks, and production lines, aligning with the requirements for scalable and secure next-generation communications.
Keywords
Industrial Internet of Things, transport protocol, TCP, UDP, QUIC, industrial robotics, latency, data transmission reliability, network efficiency
Reference for citation
Belov M. A., Kuzmina E. A., Filina N. R., Muthanna A. S. A. Analysis of Communication Protocols for Industrial Robot Control Systems // Telecom IT. 2026. Vol. 14. Iss. 1. PP. 35‒56. (in Russian). DOI: 10.31854/2307-1303-2026-14-1-35-56. EDN: YKGWDF
|
|
References
1. Kirichek R., Kulik V. Industrial Internet of Things Traffic Research and Generation // Proceedings of Telecommunication Universities. 2019. Vol. 5. Iss 3. PP. 27-36. DOI: 10.31854/1813-324X-2019-5-3-27-36. EDN: JQBTYU
2. Kulik V. A., Vakhitov S. A., Kirichek R. V. Semantic Packet Conversion Model for Industrial Internet of Things Heterogeneous Gateway // Elektrosvyaz. 2020. Iss. 3. PP. 49-54. DOI: 10.34832/ELSV.2020.4.3.007. EDN: AHXFTF
3. Lee E. A. Cyber Physical Systems: Design Challenges // Proceedings of the 11th IEEE Symposium on Object-Oriented Real-Time Distributed Computing (ISORC, 05--07 May 2008, Orlando, USA). 2008. PP. 363-369. DOI: 10.1109/ISORC.2008.25.
4. Rajkumar R., Lee I., Sha L., Stankovic J. Cyber-Physical Systems: The Next Computing Revolution // Proceedings of the 47th Design Automation Conference (13--18 June 2010, Anaheim, USA). 2010. PP. 731-736. DOI: 10.1145/1837274.1837461. EDN: OCIABJ
5. Rani D., Gill N. S. Review of Various IoT Standards and Communication Protocols // International Journal of Engineering Research and Technology. 2019. Vol. 12. Iss. 5. PP. 647-657.
6. Peng H., Tärneberg W., Fitzgerald E., Kihl M. Performance Evaluation of QUIC Vs. TCP for Cloud Control Systems // Proceedings of the 31st International Conference on Software, Telecommunications and Computer Networks (SoftCOM, 21-23 September 2023, Split, Croatia). 2023. DOI: 10.23919/SoftCOM58365.2023.10271592
7. Amet M., Thomas L., Song Y.-Q. A Performance Evaluation of QUIC in Real-Time Networks // Proceedings of the 32nd International Conference on Real-Time Networks and Systems (RTNS, 6-8 November 2024, Porto, Portugal). 2024. PP. 255-265. DOI: 10.1145/3696355.3699698
8. Silva D. R. C., Oliveira G. M. B., Silva I., Ferrari P., Sisinni E. Latency Evaluation for MQTT and WebSocket Protocols: An Industry 4.0 Perspective // IEEE Symposium on Computers and Communications (ISCC, 25-28 June 2018, Natal, Brazil). IEEE, 2018. PP. 1233-1238.
|
|
|
 Darya Novikova,  Vasiliy Podvigin
Gubkin Russian State University of Oil and Gas (National Research University), Moscow, 119991, Russian Federation
DOI 10.31854/2307-1303-2026-14-1-22-34
EDN DIUDHK
|
|
Full text
XML JATS
Abstract
Problem statement. A significant share of information security incidents on workstations is associated with process execution that deviates from typical user behavior. Traditional protection tools focused on signatures and network events do not provide behavioral context at the endpoint level, which limits the detection of rare processes and atypical parent – child process chains. The aim of the study is to improve the effectiveness of detecting deviations in user process activity by developing an agent-based monitoring system that accumulates process execution history and evaluates its typicality on workstations. Methods. The solution is based on an agent – server architecture including periodic collection of process state snapshots, process session construction, accumulative storage, and rule-based server-side analysis. Detection relies on process rarity assessment based on occurrence frequency, analysis of parent–child process chains, and rule-based identification of combined deviations without using machine learning methods. The novelty lies in a rule-based approach to behavioral analysis of processes on workstations based on the combination of a cumulative session storage, catalogs of allowed processes and process chains, and centralized server-side deviation detection logic. In contrast to existing approaches, the analysis focuses on assessing activity typicality rather than classifying maliciousness. Results. A prototype system for the Windows operating system has been developed, including a lightweight client agent and a server application based on FastAPI and SQLite. The system collects and stores process execution history, detects rare and atypical process launches, and generates alerts. Functional validation confirmed the correctness of the implemented analytical rules and the ability to generate informative signals of atypical activity. Practical significance. The proposed approach enables the formation of behavioral context of process activity on workstations and can be used as an additional data source for security monitoring and analysis systems, including SIEM and SOC, improving the detection of new and atypical user activity scenarios.
Keywords
process monitoring, information security, behavioral analysis, agent-based system, application classification, user activity, anomalous processes
Reference for citation
Novikova D., Podvigin V. Agent-Based System for Process Monitoring, Behavioral Analysis, and Anomalous Activity Detection on Workstations // Telecom IT. 2026. Vol. 14. Iss. 1. PP. 22‒34. (in Russian). DOI: 10.31854/2307-1303-2026-14-1-22-34. EDN: DIUDHK
|
|
References
1. Nikolaenko V., Vasenyova V., Zubareva E., Rudikova M. Monitoring System of the OS's Events // National Association of Scientists. PP. 63--65. (in Russian) EDN: YFTQFP
2. Al-Tameemi M., Hassan M. B., Paznikov A. A., Al-Khaykanee M. N., Albadrawi E. B. Review of Intrusion Detection Systems // LETI Transactions on Electrical Engineering & Computer Science. 2024. Vol. 17. Iss. 4. PP. 30--41. DOI: 10.32603/2071-8985-2024-17-4-30-41
3. Denysiuk D., Sochor T., Kapustian M., Kashtalian A., Savenko O. Methods for Detecting Software Implants in Corporate Networks // Proceedings of the 5th International Workshop on Intelligent Information Technologies and Systems of Information Security (IntelITSIS'2024, March 28, 2024, Khmelnytskyi, Ukraine). CEUR Workshop Proceedings. 2024. Vol. 3675. PP. 270-284.
4. Kostikov E. V. Sysmon Log Analysis Methods for Cyber Threat Detection // International Journal of Open Information Technologies. 2024. Vol. 12. Iss. 11. PP. 25-34. (in Russian) EDN: BPEPSL
5. Portase R. M., Muntea A. M., Mermeze A., Colesa A., Sebestyen G. Detection Strategies for COM, WMI, and ALPC-Based Multi-Process Malware // Sensors. 2024. Vol. 24. Iss. 16. P. 5118. DOI: 10.3390/s24165118
|
|
|
 Anton Tishkov,  Grigoriy Fokin
The Bonch-Bruevich Saint Petersburg State University of Telecommunications, St. Petersburg, 193232, Russian Federation
DOI 10.31854/2307-1303-2026-14-1-1-21
EDN DQPSAM
|
|
Full text
XML JATS
Abstract
Purpose. To analyze the simulation tools available in the Satellite Communication Toolbox expansion package for modeling the physical principles of the construction and operation of satellite communication systems in general and the link budget assessment in particular. The aim of the work is to prepare the groundwork for a training and methodological complex for studying the satellite segment of hybrid orbital-terrestrial communication networks. Methods: an overview of the simulation tools of the Satellite Communication Toolbox and their capabilities for studying the link budget of the satellite segment of hybrid orbital-terrestrial communication networks. Novelty. Unlike the works devoted to the study of the channel budget, the author’s approach consists in the formalization of proposals for the use of the simulation tools of the Satellite Communication Toolbox in solving typical practical problems of estimating the satellite communication channel budget in order to consolidate the studied physical principles in laboratory and practical classes. Results of this work is the preparation of materials for studying the satellite communication channel budget for educational and methodological purposes. Theoretical / Practical relevance: the significance of the presented material lies in the improvement of the training and methodological complex for studying the principles of construction and functional features of modern and promising satellite communication systems.
**Keywords**
Satellite Communications Toolbox, MATLAB, satellite communications, satellite link budget analysis
Reference for citation
Tishkov A., Fokin G. Modeling of Satellite Communication Systems in Satellite Communications Toolbox: Link Budget Analysis // Telecom IT. 2026. Vol. 14. Iss. 1. PP. 1‒21 (in Russian). DOI: 10.31854/2307-1303-2026-14-1-1-21. EDN: DQPSAM
|
|
References
1. Al-Hraishawi H., Chougrani H., Kisseleff S., Lagunas E., Chatzinotas S. A Survey on Nongeostationary Satellite Systems: The Communication Perspective. IEEE Communications Surveys & Tutorials, 2023, vol. 25, iss. 1, pp. 101-132. DOI: 10.1109/comst.2022.3197695. EDN: UUFWUD
2. Heo J., Sung S., Lee H., Hwang I., Hong D. MIMO Satellite Communication Systems: A Survey from the PHY Layer Perspective. IEEE Communications Surveys & Tutorials, 2023, vol. 25, iss. 3, pp. 1543-1570. DOI: 10.1109/comst.2023.3294873. EDN: XDPGZP
3. Hwang Y., Oh S.-M. Survey on Protocol Architectures for Cellular-based Low Earth Orbit Satellite Communications. In: Proceedings of the 14th International Conference on Information and Communication Technology Convergence (ICTC), 2023, pp. 1601-1603. DOI: 10.1109/ICTC58733.2023.10393800
4. Wang M., Nardin A., Ma R., Wang R., Dovis F., et al. Integrated Communication and Navigation Based on LEO Satellite Networks: A Survey. IEEE Internet of Things Journal, 2025, vol. 12, iss. 22, pp. 46244-46268. DOI: 10.1109/JIOT.2025.3601137
5. Bakhsh Z.M., Omid Y., Chen G., Kayhan F., Ma Y., et al. Multi-Satellite MIMO Systems for Direct Satellite-to-Device Communications: A Survey. IEEE Communications Surveys & Tutorials, 2025, vol. 27, iss. 3, pp. 1536-1564. DOI: 10.1109/COMST.2024.3449430
6. Kruk S., Garcia-Martin P., Popescu M., Aussel B., Dillmann S., et al. The Impact of Satellite Trails on Hubble Space Telescope Observations. Nature Astronomy, 2023, vol. 7, iss. 3, pp. 262-268. DOI: 10.1038/s41550-023-01903-3. EDN: QWVZNJ
7. Sklar B. Digital Communication. Fundamentals and Application. Moscow: "Williams" Publ., 2007. 1104 p. (in Russian)
|
|
|